Epoxy Floor Coating FAQ by Service Type / Application Style

No. Our high-performance coatings are engineered to resist hot tire pickup, a common failure in DIY or thin-mil systems.

We use industrial diamond grinders, repair all cracks, and remove existing coatings to ensure strong adhesion.

Yes, after a 48–72 hour cure time. Light foot traffic is usually fine after 24 hours.

Yes, but we will need to grind off the existing paint completely to ensure proper adhesion of the new coating.

Absolutely. It’s moisture-resistant, easy to clean, and creates a polished, finished look.

We use non-slip additives in areas prone to water or foot traffic. You can choose levels of traction based on your needs.

Yes. We offer solid colors, metallics, and custom blends to suit modern, rustic, or industrial aesthetics.

Yes. Epoxy is ideal for rental and moisture-prone areas because it’s seamless, mold-resistant, and long-lasting.

Yes, but we use UV-stable, slip-resistant coatings like polyaspartic or polyurea blends for outdoor exposure.

Our outdoor systems are flexible and resistant to cracking, salt, and thermal expansion.

If rain is forecast, we reschedule. Coatings must be applied in dry conditions.

Yes. A professionally coated patio or porch creates a clean, upscale first impression.

We install high-build systems, often 1/8″ or thicker, to withstand forklift traffic and chemical spills.

Yes. We work in sections and often schedule off-hours to minimize operational disruption.

Yes. Our coatings are designed for heavy traffic and support static and dynamic loads safely.

Yes. Epoxy creates a seamless, non-porous surface that resists bacteria, odors, and stains.

We slope toward existing drains and integrate coatings around them to maintain proper drainage.

Yes. We incorporate slip resistance and slope design to meet ADA accessibility standards.

Yes. They’re ideal for high-moisture areas, easy to clean, and resistant to mildew and odors.

Definitely. We offer full customization, including logos and colors.

Our coatings are non-porous and seamless, preventing water intrusion and microbial growth.

Yes. Our coatings resist heavy impact, petroleum, brake fluids, and tire wear.

We grind off oil residue, degrease deeply, and repair any surface damage before coating.

Yes. It offers long-term durability under extreme traffic, chemical exposure, and temperature shifts.

Yes. We offer high-gloss finishes that make vehicles stand out while being durable for foot and tire traffic.

Yes. Dealerships often add brand colors, logos, or zone striping.

Yes. They are stain-resistant, easy to clean, and maintain their appearance with minimal upkeep.

Yes. With the right finish, epoxy can look sleek, modern, and professional.

We use low-VOC and fast-curing systems that minimize downtime and odor exposure.

Yes, but we mechanically remove any old adhesive and level the surface before coating.

Yes. Our systems are pet-safe and resist stains, odors, and claws. They’re seamless for easy sanitation.

Regular mopping with approved sanitizers is all that’s needed. The surface resists absorption and odors.

Yes. It meets clean room standards and resists chemical spills and abrasion.

Yes. Our commercial-grade coatings are ideal for kennel environments with high durability and chemical resistance.

No. We use coatings with slight texture that are safe, quiet under paws, and non-slip.

With proper care, our systems last 10+ years in kennel environments before refinishing.

Yes. They are USDA-compliant, non-slip, and resist food acids, grease, and thermal shock.

Yes. We use thermal shock-resistant topcoats in kitchen environments.

With fast-curing systems, some kitchens are back in use within 24–48 hours.

Yes. We use specialized formulas that withstand aviation chemicals and rolling loads.

Yes. High-gloss coatings increase ambient light and visibility.

Yes. We can install directional striping, safety zones, and tie-down area markings.

Yes. Epoxy is seamless, durable, and easy to maintain in high-traffic school settings.

Yes. Epoxy reduces squeaks and hollow sounds often found in tile or laminate floors.

Absolutely. We use zero/low-VOC formulas safe for use in education facilities.

Yes. We apply high-wear topcoats and install with expansion joints in mind.

Yes. Custom striping and color zoning improve organization and aesthetics.

Yes. It resists dirt, salt, and scuffing—ideal for busy public spaces.

Yes. From worship spaces to fellowship halls, epoxy offers beauty, cleanliness, and durability.

No. Our topcoats are abrasion-resistant and protect from daily use.

Yes. We offer stained, metallic, or flake designs for a warm and inviting feel.

Yes. We use industrial grinders and shot blasters to remove failed surfaces and prep the slab.

We use HEPA-filtered vacuums to minimize dust during demo. Cleanup is always part of our process.

Yes. We grind it down to clean concrete and start fresh with a properly bonded coating.

We can level low spots, repair spalls, and ensure the surface is flat and properly pitched.

Minor leveling is included in most installs. Major repairs may add a day, but ensure long-term performance.

Yes. We can pitch or level slabs to improve drainage and safety before coating.

They combine color flakes with a base coat and clear topcoat for a granite-like look and added traction.

Yes. Flakes are great for disguising minor flaws and adding visual texture.

Yes. We offer small, medium, and large flake sizes, plus custom blends and stone looks.

Metallic pigments create a one-of-a-kind, 3D marble or lava flow look. It’s a premium decorative finish.

Yes, popular in basements, salons, showrooms, and retail.

Yes. No two floors are exactly alike. The pigments create natural flow and variation during application.

Clean, simple, and modern. Often used in offices, labs, or warehouses where color coding is helpful.

We offer a wide range of industrial and designer colors, including safety colors for commercial use.

Yes. They hide less dirt than high-gloss metallics and can be recoated easily.

Yes. Polished concrete offers a natural stone-like shine without coatings, ideal for retail or modern homes.

Polishing densifies and grinds the concrete surface; epoxy adds a protective top layer.

Yes, but much less frequently than traditional concrete. It’s highly resistant to wear.

Stains color the concrete without adding a protective layer. Sealing preserves the color. Epoxy adds protection and customization.

Yes. Acid stains and water-based dyes allow natural, mottled finishes.

Yes. We use UV-stable stains and breathable sealers for patios, walkways, and driveways.

Yes. We offer custom branding, color schemes, and embedded graphics for both residential and commercial clients.

Absolutely. We can custom-mix flakes, pigments, and resins to match any vision.

Slightly, yes. But the result is a truly personalized floor that enhances your space.